? ? www.p-tec.net 052215 rev2 jas page 1 of 9 product specification part number pdc302-cxpxxx details ? 0.3(7.60mm) display ? 2 digit, 7 segment ? common anode or cathode ? alingap or ingan dice used features ? low power consumption ? rohs compliant ? gray face, white segments or black face, white segments ? easy mounting on pcb or socket mechanical dimensions notes: ? 1. dimensions in millimeters [inch], and tolerance is 0.25 [.0 10] and angle is 1 unless otherwise noted. 2. bending length*1% 3. all pins are ?0.51[.020]0.1[.004] 4. ? specifications subject to change without notice
? ? www.p-tec.net 052215 rev2 jas page 2 of 9 device selection guide model number chip description note material emitting color common cathode x=c / common anode x=a add bfws to end of part number for black face, white segment version pdc302-cxpg05 ingan true green pdc302-cxpg17 alingap yellow green pdc302-cxpy04 yellow pdc302-cxpa11 amber pdc302-cxpr02 orange-red PDC302-CXPR11 red pdc302-cxpr21 deep red absolute maximum ratings at ta=25c parameter symbol rating unit g17/y04/a11/r02/r11/r21 g05 power dissipation per dice p ad 70 114 mw derating liner from 25c per dice -- 0.33 0.4 ma/c continuous forward current per dice i af 25 30 ma peak current per dice (duty cycle 1/10, 1khz) i pf 90 100 ma reverse voltage per dice vr 5 5 v electrostatic discharge (hbm) esd / 1000 v operating temperature topr -35~+85 c storage temperature tstg -35~+85 c solder conditions: 1/16 inch below seating plane for 3 -5 secon ds at 260c.
? ? www.p-tec.net 052215 rev2 jas page 3 of 9 electrical and optical char acteristics at ta=25c parameter symbol chip min. typ. max. unit condition forward voltage per segment vf g05 -- 3.2 3.8 v if=20ma g17/y04/a11 /r02/r11/r21 -- 2 2.8 luminous intensity per segment iv g05 -- 120 -- mcd if=10ma g17 -- 6 -- y04 -- 30 -- a11 -- 45 -- r02 -- 20 -- r11 -- 12 r21 -- 10 -- peak emission wavelength / dominant wavelength p/ d g05 -- */525 -- nm if=20ma g17 -- 572/570 -- y04 -- 592/590 -- a11 -- 612/605 -- r02 -- 632/625 -- r11 -- 644/630 -- r21 -- 660/645 -- reverse current i r -- -- 100 a vr=5v luminous intensity matching ratio iv-m -- -- 2:1 -- if=10ma
? ? www.p-tec.net 052215 rev2 jas page 4 of 9 typical electrical/optical characteristic curves
? ? www.p-tec.net 052215 rev2 jas page 5 of 9 luminous general lv bin grade (i f = 10ma) color rank limits (if=20ma)
? ? www.p-tec.net 052215 rev2 jas page 6 of 9 all light-on segments feature & pad position internal circuit diagram common anode common cathode
? ? www.p-tec.net 052215 rev2 jas page 7 of 9 precautions for use 1. recommended soldering conditions 1.1. wave soldering basic spec is 5sec. when 260c. if temperature is higher, time should be shor ter (+10c -1sec.). 1.2. soldering iron: power dissipation of iron should be smaller than 15w and temp s hould be controllable. soldering temperature should be under 260c, time 3sec.
? ? www.p-tec.net 052215 rev2 jas page 8 of 9 packing dimensions note: 1. specifications subject to change without notice.
? ? www.p-tec.net 052215 rev2 jas page 9 of 9 record of revisions rev. comments page date 0 released spec -- 11/1/13 1 logo update all 04/08/15 2 part number typo correction all 05/22/15 customer approval signatures approved by checked by prepared by
|
